Axis Wake Research Om 2012 Specifications download pdf (Page 48)

Operation

3-9

Starting the Engine

Axis boats are equipped with sensors that constantly monitor various functions of the

boat. Certain functions, if outside of pre-determined operating parameters, may activate

an alarm located under the dash. When the ignition key is turned ON, the alarm will

sound to indicate it is operating. Once the engine is running, the alarm should be off

unless a problem is detected. If the alarm sounds during operation, stop the boat as soon

as possible and turn off the engine. Investigate and correct the problem before returning

to operation. Pressing the ENTER button on the display will silence the alarm for four

minutes. Following is a list of monitored functions that can activate the alarm:

Engine Oil Alarm:

RPMs above 300 and below 1000 with oil pressure below 4 psi.

RPMs above 1000 with oil pressure below 18 psi.

Engine Temperature Alarm:

RPMs above 300 with temperature above 203° F. Alarm will reset when engine

cools below 198° F.

Battery Voltage Alarm:

Voltage drops below 11 V.

Voltage is above 16 V.

Water Depth Alarm:

Water is shallower than water depth alarm setting.

Refer to Section 4, Care and Maintenance, Electrical, for more information on the alarm.

Please refer to your engine owner’s manual for the proper starting procedures.

Chapter 3_12_Axis_ Chapter 3 doc.qxd 9/16/11 1:10 PM Page 9

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 89 90

No comments

Axis Wake Research Om 2012 Specifications Page 48